SandHills Equipment Sales

I have 3 basically brand new Ford Super Duty truck box's for sale. One is off a loaded truck as it has the chrome bumper with it and the tail lights have the radar sensors. It also has the 4 securement brackets inside the box wall as seen in photos. This one is priced at $3000.00 complete.

The other 2 are priced at $2500.

They all come with the bumpers.

Custom built 21ft 6 inch x 98" wide, all steel truck deck with 3 underbody storage box's and a hydraulic slide out basket mounted under RH front side. The headache rack is 5 ft above deck height. It is a very well built deck. 3/16 check plate top. Main rails are heavy wall 3 x 3 tubing. Yes it will need to be sand blasted and painted your colors. To build this deck new is over $20,000.

Offered here for only $4000.

Call Dan 780-297-8757 or email this add

Price is firm and the UNIC 10,000 lb picker is also available for sale

I HAVE 2 PULLMASTER HYDRAULIC WINCH'S TO SELL. A PL5 AND A PL2 MODELS.

BOTH ARE FULL OF WINCH LINE. THE PL5 HAS 1/2 " LINE AND THE PL2 HAS 3/8 LINE.

I REMOVED THEM FROM A SPECIALTY PEACE OF EQUIPMENT THAT WAS JUST NOT USED. ( basically new) THEY ARE BOTH LIKE NEW AND I WANT A VERY RESONABLE PRICE FOR THEM.

I have done a lot of research on these winchs and the PL5 sells new for about $6000. I will sell this one for $2500 and that includes $500 worth of line as well and the safety mesh cover.

The PL2 sells new for about $3500 at any dealer. I will sell this one for $1700 with the line on it.

TAKE A GOOD LOOK AT PICTURES THAT SHOW THEM WELL. IF YOU ARE SERIOUSLY INTERESTED CALL DAN AT 780-297-8757

This is a Miller Gold Star 452. This is a 600 amp commercial welder. I just checked out the new replacement cost on it and it is $10,787.00.

As far as I know this unit has never been used, but if it has , it is very very little. You judge. I will sell this unit for only $4500.00 and it can easily be shipped as it is already on a pallet and we can ship according to your needs.

PLEASE ONLY INQIRE IF YOU ARE SERIOUS AND WANT TO PURCHASE. PRICES ARE FIRM !

AND IT IS EXACTLY AS SHOWN.

I have 3 , 9ft flat decks for single wheel trucks. They are basically all the same with a few minor differences.

9 ft long, x 80" wide. The headache rack is 44" high. They all have a whip antenna and a strobe light on them. 1 of the decks have left and right steps at front of deck. 2 have only LH step. They all have the drop down rear bumper. They have lights on them . There are some slight differences in the fuel filler mounts.

They will fit any conventional non dually trucks that had 8 ft box on them.

The decks are steel construction with wood flooring. I have only 3 remaining so the fastest guys get the better choice. OH , the price is firm. I will not take offers or bicker on price. Just know that in advance.

I have 4 - 45 gallon drums of Multi Purpose #2 bulk grease for sale. As you can see in photos this is 181.4 KG or 400 lbs of grease. THIS IS NEW SEALED DRUMS. Retail value is approx $2500.00. per drum. I will sell these to you for 1/2 price, only $1250 each. Can be picked up at my location or shipped. Whatever you wish.

Just for reference the small 50 kg drum sells for $700 each. These are near 4 times the volume.

This is a 18 ft Supreme Van Body of of a single axle truck. It has the rear roll up door and the fiberglass daylight roof. It can easily be installed back onto your truck or possibly used for a permanent storage building. Either way it is a great deal at only $2900.

Take a good look at the pictures as they show it quite well. It has 2 steel main frame rails that run under the full length of the van so if required it can be lowered down to near ground level if used for storage. We are open Monday - Friday but NOT on the weekends, so no you can't look at it on Saturday or Sunday. Yes we can easily load it on your trailer or truck for transporting it.

If serious call me , Dan , at 780-297-8757

Note, The top panel on the roll up rear door is NOT missing as it may appear. It is simply decaled over with black decaling. It can be removed with a heat gun and a bit of patience

We have a used MIDWESTERN sideboom Model M510 attachment for sale. It is a complete unit and was certified before we removed it. All functions were tested and operated . The last 3 pictures show it when it was on the crawler. Was mounted on a 2000 JD 550

I dont have a use for it but you may. I'm only asking $4500 for the unit which is a tiny fraction of what it is worth to buy new.

Contact Dan with SandHills Equipment Sales at 780-297-8757 or email this add.

Wrecking this 2009 IHC Durastar s/a truck tractor out for parts. Rear diff is gone already. Cab , hood, frame is in excellent shape . The truck only had 189000 km.

I will sell you whatever parts you need at a very resonable price .

It still has a non running 466 cid engine , clutch and 10 spd transmission as well as drive shaft components. Exhaust and emmission parts a s well

Please take a look at photos Prices will vary depending on parts and quantity.

We are open Monday - Friday 8 - 5

780-297-8757

NEW GANDER BRAND LEATHER WELDING JACKETS for sale. I have a large selection or NEW welding jackets for sale at way lower than wholesale prices. They are only $40.00 each, not the $120 and up you will pay at your welding supplier. I do have a limited quantity so when they are gone......... they are gone !

Sizes from Small to 4 XL. All priced the same at only $40.00 Yes the price is firm. You can purchase them from Monday - Friday 8 am to 5 pm. Please do not call me on weekends or after hours

Or you can simply email me thru this add and I will get back to you asap.

The pictures are the exact ones that I have.

Dan 780-297-8757

I have a large number of NEW Gander Brand large welding gloves for sale. They are the RUF RIGGER high sleeve gloves. BDG gloves as pictured here. According to the tag inside they are a size 12. I have large hands and they fit me very well. Selling them for $10 each and the PRICE IS FIRM. No volume discounts , etc. This price is well below wholesale cost price. Can be paid for by cash or etransfer. I will be selling them during normal bussiness hours , Monday to Friday, 8 am to 5 pm only. Do not call me on weekends or after hours. Or simply email me here thru KIJIJI and I will get back to you asap.

Dan 780-297-8757

I have just aquired a large quantity of NEW / UNUSED GANDER BRAND lined welding gloves. Selling them off far below wholesale price at only $13.00 each. The price is firm and can be paid by cash or etransfer. I am available Monday - Friday 8 am - 5pm Only. Please do not call me after hours or weekends. You can purchase 1 pair or 100 pairs, price remains the same .

Dan 780-297-8757

As you see in the photo I have a large selection of clevis's in this box for sale . They are all used . Will sell very reasonable price . Of course the bigger the more expensive or maybe take them all for $400 cash and then get the steel box as a bonus. That is the best buy !!

LOCKABLE GRAVITY FEED FUEL TANK,

FILTER, HOSE, NOZZLE, AND BOTTOM SPILL TRAY.

LOCKABLE FOLD OPEN COVER FOR SECURITY.

TANK IS THE UPPER SECTION YOU SEE IN PICS AND LOWER SECTION IS THE SPILL TRAY.

6'6" WIDE X 3' THICK X 4' HIGH - TANK ( APPROX 2200 LITERS ) OVERALL DIMENSIONS WITH SPILL TRAY - 6'6" WIDE X 4' THICK X 7' HIGH

PREVIOUSLY USED AS A GASOLINE TANK.  

ONLY $1900.00

SKID MOUNTED DIESEL FUEL TANK AND 115V PUMP, FILTERS , HOSE ETC. THIS TANK HAS CONTAINED DIESEL ONLY. 8' X 5' X 7'2" TALL, OVERALL SKID SIZE IS 13' X 5'2" ( 280 cu ft = aprox 7900 liters ) VERY GOOD CONDITION AND READY TO USE.